DESCRIPTION Water based release agent for PU shoe sole.
CHARACTERISTICS Water based emulsion
APPLICATION
¡¤ Clean well the mould.
¡¤ Mix with water before using,dilute rate1KG release agent mix with 8~12KG normal water.
¡¤ Mould temperature: 50-70degree.
¡¤ Spray using nozzle gun diam 0.3 mm.
¡¤ Tank pressure 0,8 -1 bar.
¡¤ Air pressure 2.5 bar.
¡¤ Spray the release agent directly into the mould.
¡¤ After spraying the release agent dry it with air,and clean by cotton.
ADVANTAGES
¡¤ No solvent content
¡¤ Environmental friendly product
PACKING
¡¤ Plastic cans of 25KG.
STORAGE
¡¤ Keep in well closed original packing in a dry and ventilated place.
¡¤ Shelf life, 12 months.
¡¤ Avoid extreme cold-heat (preferably +5/30 ¡ãc)